Product Description
Drill Pipe
JX Petro provides a complete line of drill string products, including integral and friction welded drill pipes in nominal sizes from 2-3/8" to 6-5/8" and in a wide range of wall thicknesses. drill pipe adopts a strict quality control regimen to ensure total quality control from initial material qualification, in-process inspection to final outgoing quality inspection. We ensure that each joint of drill pipe meets your needs for reliability, durability and performance.
Detail Mechanical Property of the Drill Pipe:
| Group | Grade | Yield Strength | Tensile Strength | ||||
| Minimum | Maximum | Minimum | |||||
| psi | Mpa | psi | Mpa | psi | Mpa | ||
| 1 | E-75 | 75000 | 517 | 105000 | 724 | 100000 | 689 |
| 3 | X-95 | 95000 | 655 | 125000 | 862 | 105000 | 724 |
| G-105 | 105000 | 724 | 135000 | 931 | 115000 | 793 | |
| S-135 | 135000 | 931 | 165000 | 1138 | 145000 | 1000 | |
Main features:
1. The drill rods comply with the provisions of API SPEC 5D & API SPEC7.
2. The grade of steel are determined according to the requirements of Group 1 & Group 3 of API SPEC 5D.
3. Drill pipe joints at the same level comply with the provisions under the Standard API SPEC 7.
4. Standard pipe size range: 2-3/8"~6-5/8"
5. Hardbanding: The wear rate is less than 6% of that of bare tool joint, which can prolong 3 times of the tool joint service life. Good property of friction-reduction, which can reduce the casing wear to the least, and its wear to casing is less than 11% of that of bare tool joint. Reduce the torque of drilling string.
6. Widely used for oil, gas, water well and geothermal fields in Turkey, Poland, Japan, Singapore etc.
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.
